PROMASTER weatherproof empty housing for 2 x T8, 120 cm, without LED tubes
- Weatherproof batten for two T8 light sources
- IP65: dust-tight and protected against water jets
- 126.1 x 10.2 x 7 cm to plan the required space
- For workshops and storage, operates at 175–250 V
Pay easily and securely.
Same-day dispatch from our EU warehouse.
For consumers, under our withdrawal policy.
PROMASTER weatherproof empty housing for 2 x T8, 120 cm, without LED tubes
Where workshop dust or water splashes and jets are part of the surroundings, the lighting needs a suitably protected housing. The PRO is an IP65 weatherproof batten with holders for two T8 light sources. It provides a basis for lighting in workshops, storage rooms or ancillary business premises where luminaire protection is important.
Protection for more demanding environments
IP65 means dust-tight and protected against water jets. This is a practical consideration when choosing a luminaire for work and utility areas: the required brightness is not the only factor; the conditions at the intended location must also suit the luminaire type. The PRO combines the design of a weatherproof batten with the specified housing protection.
In a storage area, orientation may be the priority, while a workshop may require light at the work station. The choice of T8 light sources also helps determine the available amount and colour of light. The designation 2xT8 describes holders for two light sources; it is not a wattage rating.
Plan the light sources and space together
With dimensions of 126.1 x 10.2 x 7 cm, the luminaire requires a suitably sized mounting space. Include these measurements in your plans early, for example if walls, ceiling areas or existing installations limit the available space.
The specified operating voltage range is 175–250 V. The 2xT8 version is the key factor when selecting the light sources. This allows you to consider the housing, electrical requirements and intended lighting task together rather than deciding on the shape alone. The PRO is one batten with two T8 holders.
The empty housing is designed for two single-ended-powered 120 cm LED T8 tubes. LED tubes are not included.
- Product type
- Moisture-proof batten light
- Model
- PROMASTER
- Base
- 2 x T8
- Operating voltage
- 175-250 V
- Housing colour
- Gray
- Dimensions
- 1261 x 102 x 70 mm
- IP rating
- IP65
- Bulb included
- No
feedback Report comment