Wireless light switch, CONTROLLER-4, 4 channels
- Wireless light switch CONTROLLER-4
- Protection rating: IP20
- Housing colour: white
Pay easily and securely.
Same-day dispatch from our EU warehouse.
For consumers, under our withdrawal policy.
Wireless light switch, CONTROLLER-4, 4 channels
Switch lighting wirelessly
This wireless light switch consists of a remote control and its corresponding receiver. The channels allow suitable lighting groups to be controlled separately.
Receiver and remote control
The receiver operates at the mains voltage specified in the catalogue. The remote control has its own battery supply; the two voltages must not be confused.
When choosing a light switch, the lamp type matters as well as the connected wattage. The CONTROLLER-4 clearly distinguishes between them: it is designed for a maximum of 300 W for LED lamps or 1000 W for incandescent lamps. It provides a switching solution for indoor lighting loads that remain within these limits.
Keep the appropriate load in mind
For an LED installation, the LED limit applies; the higher rating for incandescent lamps cannot be applied to LED. If several lights are connected, take their total load into account. The stated maximum values refer to the permitted lamp load, not the switch’s power consumption.
White housing for dry rooms
Its white housing fits into light-coloured interiors, such as a living room or hallway. The receiver’s operating voltage is 180–250 V. IP20 offers no water protection, so the switch is intended for a dry location. When connecting it to an existing installation, consider both the available supply voltage and the type and total load of the lighting.
- Product type
- Wireless light switch
- Model
- CONTROLLER-4
- Operating voltage
- 180-250 V
- Housing colour
- White
- IP rating
- IP20
- Maximum lamp power
- max 300 W LED / 1000 W Tungsten
- Bulb included
- Not applicable
feedback Report comment