Wireless light switch, CONTROLLER-1, 1 channel
- Wireless light switch CONTROLLER-1
- Protection rating: IP20
- Housing colour: white
Pay easily and securely.
Same-day dispatch from our EU warehouse.
For consumers, under our withdrawal policy.
Wireless light switch, CONTROLLER-1, 1 channel
Switch lighting by radio
This radio light switch consists of a remote control and an associated receiver. The channels allow separate control of suitable lighting groups.
Receiver and remote control
The receiver operates at the mains voltage specified in the catalogue. The remote control has its own battery supply; the two voltages must not be confused.
When switching lighting, the total lamp load is not the only consideration; the type of connected lamps also matters. The CONTROLLER-1 therefore distinguishes between a maximum LED lamp load of 300 W and a maximum tungsten lamp load of 1000 W. This helps you select the switch for the intended lighting installation.
The lamp load matters
For an LED installation, the limit of 300 W maximum for LED is the relevant figure. The higher rating of 1000 W applies to tungsten lamps and must not be applied to LED lamps. Both values describe the permitted lamp load, not the switch’s own power consumption. Before choosing, check the lamp type and the total connected load.
White finish for indoor use
The white housing offers a subtle colour for indoor spaces. With IP20, the switch has no water protection and is intended for a dry location. An operating voltage of 180–250 V is specified for the receiver’s electrical connection. Lamp load, supply and location are therefore the key points to check against the existing installation before fitting.
- Product type
- Wireless light switch
- Model
- CONTROLLER-1
- Operating voltage
- 180-250 V
- Housing colour
- White
- IP rating
- IP20
- Maximum lamp power
- max 300 W LED / 1000 W Tungsten
- Bulb included
- Not applicable
feedback Report comment