LED controller, BLACKWATER CCT CONTROLLER 6A
- LED controller for systems with 12 or 24 V DC
- Maximum connected load in the range of 216–432 W
- Compact dimensions of 5.3 x 6 x 2.3 cm
- IP20: for dry installation locations, away from water
Pay easily and securely.
Same-day dispatch from our EU warehouse.
For consumers, under our withdrawal policy.
LED controller, BLACKWATER CCT CONTROLLER 6A
An LED controller does not take up much space, but it must be electrically suited to the system. The BLACKWATER CCT CONTROLLER 6A combines a compact format with an operating voltage of 12/24 V DC. It is therefore intended for LED systems with direct current and not for direct connection to mains voltage.
Consider voltage and connected load together
The voltage of the LED application and its total connected load are key when assembling the system. The maximum connected load is specified as 216–432 W. This value refers to the load that can be connected, not the controller’s own power consumption. Before combining components, check that their voltage level and power requirements are suitable for the controller.
Compact format, dry installation location
At 5.3 x 6 x 2.3 cm, its space requirements can be taken into account when planning the control area. The IP20 rating offers no protection against water, so the controller must be installed in a dry location. This allows electrical suitability and available space to be checked before installation, rather than fitting the controller in at the end of the planning process.
This controller regulates the colour temperature of suitable CCT LED strips using an RF remote control.
- Product type
- LED controller
- Model
- BLACKWATER CCT CONTROLLER 6A
- Operating voltage
- 12/24 V DC
- Dimensions
- 53 x 60 x 23 mm
- IP rating
- IP20
- Maximum connected load
- 216 W-432 W
- Bulb included
- Not applicable
- Control
- RF remote control
feedback Report comment