LED controller, TOUCH-RGB
- LED controller for integration into your lighting project
- Operates at 12–24 V DC in a DC system
- Maximum connected load specified as 144–288 W
- IP20: for dry indoor areas, with no water protection
Pay easily and securely.
Same-day dispatch from our EU warehouse.
For consumers, under our withdrawal policy.
LED controller, TOUCH-RGB
When installing an LED controller, correct electrical integration is essential. The TOUCH-RGB is an LED controller for 12–24 V DC and is intended for a DC system. It is suitable as a control component when configuring an LED installation designed for this supply.
Match the voltage and connected load
The maximum connected load is specified as 144–288 W. This range refers to the permissible connected load, not the controller’s power consumption. Selection therefore depends on both the system’s operating voltage and the connected LED load. The 12–24 V DC supply must be distinguished from a direct mains connection.
Space requirements indoors
With dimensions of 8.6 x 8.6 x 3.6 cm, the required space can be considered during planning. These dimensions describe the product and are not a specification for a mounting cut-out. IP20 provides no water protection, so use is intended for a dry indoor area. Three practical selection points are therefore clear: a suitable DC system, a matched connected load and sufficient space at the intended location.
Operation is via the touch function.
- Product type
- LED controller
- Model
- TOUCH-RGB
- Operating voltage
- 12-24 V DC
- Dimensions
- 86 x 86 x 36 mm
- IP rating
- IP20
- Maximum connected load
- 144-288 W
- Bulb included
- Not applicable
feedback Report comment