LED controller, TOUCH
- LED controller for operation at 12–24 V DC
- Maximum connected load specified as 144–288 W
- Compact dimensions of 8.6 x 8.6 x 3.6 cm
- White housing, IP20 with no water protection
Pay easily and securely.
Same-day dispatch from our EU warehouse.
For consumers, under our withdrawal policy.
LED controller, TOUCH
In an LED installation, the controller must match the electrical supply. The LED controller TOUCH operates on 12–24 V DC and is intended for the corresponding low-voltage side of the installation. Its operating voltage is not the same as mains voltage.
Plan for a suitable connected load
The maximum connected load is specified as 144–288 W. This range describes the permissible connected load, not the controller’s own power consumption. Both the operating voltage and the total power of the connected LED application are therefore relevant when configuring the installation. The supply, controller and connected lighting must be electrically compatible.
Allow for the space required in advance
The white housing measures 8.6 x 8.6 x 3.6 cm. These dimensions help check that the intended installation space is sufficient and allow the controller to be included in the planning. Protection rating IP20 provides no water protection. A dry indoor area is therefore the appropriate location. To extend an existing LED installation, first compare its DC supply and total connected load with these specifications.
Operation is via the touch function.
- Product type
- LED controller
- Model
- TOUCH
- Operating voltage
- 12-24 V DC
- Housing colour
- White
- Dimensions
- 86 x 86 x 36 mm
- IP rating
- IP20
- Maximum connected load
- 144-288 W
- Bulb included
- Not applicable
feedback Report comment