LED controller, RGB CONTROLLER 6A
- RGB controller for LED applications with 12–24 V DC
- Maximum connected load in the range of 216–432 W
- Compact dimensions: 5.3 x 6 x 2.3 cm
- IP20: for dry indoor areas, with no water protection
Pay easily and securely.
Same-day dispatch from our EU warehouse.
For consumers, under our withdrawal policy.
LED controller, RGB CONTROLLER 6A
In an RGB LED installation, the controller must match the electrical design. The RGB CONTROLLER 6A operates at 12–24 V DC and is intended for corresponding low-voltage applications. It can be included where an RGB lighting solution requires a separate control unit.
Match the voltage and connected load
The maximum connected load is specified as 216–432 W. This range describes the possible connected load, not the controller’s own power consumption. The operating voltage and the power of the intended LED application are therefore both relevant when configuring the installation. The controller runs on DC; direct connection to mains voltage is not intended.
Plan space requirements early
With dimensions of 5.3 x 6 x 2.3 cm, the control unit’s space requirements can be considered during planning. This is particularly useful in installations where space for the controller is limited. IP20 provides no water protection, so a dry indoor area is the appropriate installation location. This helps align the electrical design with the intended installation space from the outset.
- Product type
- LED controller
- Model
- RGB CONTROLLER 6A
- Operating voltage
- 12-24 V DC
- Dimensions
- 53 x 60 x 23 mm
- IP rating
- IP20
- Maximum connected load
- 216-432 W
- Bulb included
- Not applicable
feedback Report comment