Motion sensor, SMART
- Motion sensor for demand-controlled lighting
- Maximum lamp load: 1200 W
- Compact dimensions of 1,8 x 2,5 cm for planning
- 220–240 V, white housing and IP20 rating
Pay easily and securely.
Same-day dispatch from our EU warehouse.
For consumers, under our withdrawal policy.
Motion sensor, SMART
Should the light respond to movement rather than only to a switch being pressed? The SMART motion sensor is one component for this type of lighting control. Possible locations include dry passageways, storage rooms or other indoor areas where lighting needs to switch on in response to movement. The housing is white and measures 1,8 x 2,5 cm.
Match the lamp load correctly
A maximum lamp load of 1200 W is specified for SMART. This is the upper limit for the connected lighting, not the sensor’s own power consumption. Match the intended lamp load to this value; if several lights are switched together, their total load is relevant.
Consider the installation location
The motion sensor is designed for an operating voltage of 220–240 V. With IP20, it has no water protection and belongs in dry indoor areas without exposure to water. Use the stated dimensions to check whether it will fit at the planned installation location. The intended function is the key selection criterion: if the lighting should respond to movement, SMART is a suitable type of device for this control approach.
- Product type
- Motion detector
- Model
- SMART
- Operating voltage
- 220-240 V
- Housing colour
- White
- Dimensions
- 18 x 25 mm
- IP rating
- IP20
- Maximum lamp power
- Max. 1200 W
- Bulb included
- Not applicable
- Sensor
- Yes
- Sensor technology
- Motion detector
feedback Report comment