LED power supply, VESPA-200/24, 200 W
- 24 V DC output for compatible LED applications
- 200 W output power for supply planning
- Input for AC voltage from 85 to 265 V
- Black housing, IP20 for dry indoor areas
Pay easily and securely.
Same-day dispatch from our EU warehouse.
For consumers, under our withdrawal policy.
LED power supply, VESPA-200/24, 200 W
For LED applications with 24 V direct current, the VESPA-200/24 connects to the mains supply. This LED power supply converts an input voltage of 85–265 V AC into 24 V DC at the output. With an output power of 200 W, it can supply compatible LED loads, such as suitably rated LED strips.
Match the loads to the power supply
The required voltage and the total connected power are key. The 200 W describes the power supply’s output power, not a general power consumption figure for your lighting. For strips with a power rating per metre, calculate the requirement from the planned length and the respective per-metre value. If supplying several loads, consider their combined power requirement.
Allow space in a dry indoor area
The black housing measures 5 x 3.1 x 18.5 cm. These dimensions help you check the available installation space early and incorporate the power supply into your lighting project. Protection rating IP20 does not provide water protection; the unit is therefore intended for a dry indoor location. This helps you choose a power supply suited to the electrical task and the available space.
- Product type
- LED power supply
- Model
- VESPA-200/24
- Housing colour
- Black
- Dimensions
- 50 x 31 x 185 mm
- IP rating
- IP20
- Output voltage
- 24 V DC
- Output power
- 200 W
- Input voltage
- 85-265 V AC
- Bulb included
- Not applicable
feedback Report comment