LED power supply, VESPA-100/24, 100 W
- 24 V DC output for compatible LED applications
- 100 W output power for load planning
- AC voltage input: 85–265 V
- IP20: for dry installation locations with no water protection
Pay easily and securely.
Same-day dispatch from our EU warehouse.
For consumers, under our withdrawal policy.
LED power supply, VESPA-100/24, 100 W
An LED application using 24 V DC needs a suitable power supply. The VESPA-100/24 provides 24 V DC at the output and is rated at 100 W output power. These are the two key values for checking compatibility with the connected LED components.
Match the input and output correctly
The LED power supply is designed for 85–265 V AC at the input. This AC voltage range applies to the supply side and should not be confused with the LED output voltage. The connected components must be suitable for 24 V DC, and their total power requirement must be checked against the power supply’s output power.
The 100 W rating describes the output power. It does not mean that every connected application automatically draws this amount of power.
Check the installation space in advance
The dimensions of 5 x 3.1 x 14.5 cm make it possible to check the required space before installation. IP20 provides no water protection, so the intended location must be dry and suitably protected. The choice therefore comes down to three practical questions: do the LEDs require 24 V DC, does their total power requirement match the power supply, and is there enough space at the intended location?
- Product type
- LED power supply
- Model
- VESPA-100/24
- Dimensions
- 50 x 31 x 145 mm
- IP rating
- IP20
- Output voltage
- 24 V DC
- Output power
- 100 W
- Input voltage
- 85-265 V AC
- Bulb included
- Not applicable
feedback Report comment