LED power supply, VESPA-60/24, 60 W
- 24 V DC output for compatible LED applications
- 60 W output power as a basis for planning
- Input for AC voltage from 85 to 265 V
- IP20: for dry indoor areas, with no water protection
Pay easily and securely.
Same-day dispatch from our EU warehouse.
For consumers, under our withdrawal policy.
LED power supply, VESPA-60/24, 60 W
An LED application using 24 V DC needs a suitable power supply. The VESPA-60/24 provides 24 V DC at the output and is rated at 60 W output power. It is suitable for LED loads whose voltage and power requirements match these values.
Clearly distinguish input and output
The LED power supply operates at the input with 85–265 V AC, or alternating voltage. The output provides 24 V DC, or direct voltage. Both sides matter when selecting it: the supply must match the input, and the connected LED loads must match the output. The 60 W refers to output power and should not be understood as constant power consumption.
Allow space for the power supply
The stated dimensions of 5 x 3.1 x 11.5 cm make it possible to check the space available at the intended installation location. IP20 provides no water protection, so a dry indoor area should be chosen. Before connecting, compare the total power required by the LED application with the power supply’s output power. This takes voltage, power requirements and available space into account.
- Product type
- LED power supply
- Model
- VESPA-60/24
- Dimensions
- 50 x 31 x 115 mm
- IP rating
- IP20
- Output voltage
- 24 V DC
- Output power
- 60 W
- Input voltage
- 85-265 V AC
- Bulb included
- Not applicable
feedback Report comment